Helm Station - Part 1

This project will likely have several "Parts".  Its been raining since Friday, but I have been able to squeeze in a little bit of work on the helm station.

This is the mold for the helm station.  The 2 cubbies were afterthoughts.  I had already assembled the main form and applied silicon fillets.   The crevice between the cubbies and the forward part of the form presented a challenge in placing fillets and subsequently laying mat and fabric.  I was able to apply a layer of each today, but got to dark to take a picture.  I will need to apply one additional layer of mat and fabric, but since it gets dark around 5:00, it'll have to wait until next weekend.

The cubbies were sized to accommodate a fire extinguisher on the port side and one or two winch handles on the starboard side.

That is all for this post!